Explore the following case studies for examples of current and past projects undertaken through COSIA
Filtered tailings dry stack disposal often requires low cake residual moistures to meet the stacking specifications defined by geotechnical studies. Low residual moisture targets and increasing throughputs require careful definition of filter press process parameters in order to prevent unnecessary extra capital and operating costs. Because of this, alongside the testing phase, a comprehensive characterisation of the material, not limited to standard geotechnical tests, becomes important. Standard physical/chemical characterisation of mining slurries includes both basic (liquor, solid and slurry density, solid concentration, solid specific gravity) and thorough analysis (yield stress, particle size distribution, elements and mineral phase detection). Each of these requires different techniques. Phyllosilicates (i.e. clays) are one of the most common components of mine tailings, together with quartz, feldspar and other aluminosilicates. Clay type and relative content can have a drastic influence on the filtration process and furthermore on filter design. A detailed analysis of clayey phases can give useful information about the filterability of a slurry and, therefore, on the expected filter performance and its variability. A comprehensive study about clay detection and quantification and correlation with dewatering properties is presented here. It involves different analytical techniques (powder X-ray diffraction, Rietveld refinement, qualitative evaluation) and correlation studies based on the lab testing campaigns database. The results show how the filterability can be strongly affected by the phyllosilicate type and small variations in their content, to yield completely different cake properties, showing that smectite group clays have the greatest influence on filterability. The impact of these characteristics on filter sizing, especially for large equipment (like the GHT5000F filter press) and related ancillaries will be discussed.
By offering an opportunity to fulfil environmental and process water recovery specifications, filtration of tailings has received increasing attention. In the process, complete cake detachment is required to maintain high throughputs. Incomplete discharge represents a bottleneck in the process. Therefore, a deeper understanding of cake detachment behaviour is a key to success. Experimental studies on adhesion forces between filter cake and cloth are a first step towards detachment prediction. Filtrations using an FLSmidth lab filter press and subsequent adhesion measurements with iron ore tailings and two different filter media show the influence of filtration pressure on adhesion.