The objective during TSF beach development is to still maintain a slurry that is pumpable and self-distributing at the tailings storage facility (TSF), rather than having to rely on trucks or on conveyors and stacking systems to manage a cake, but one that will deposit at a steeper beach slope than can be achieved by thickening alone. The use of ultra paste has the potential to broaden the range of topographic conditions that will suit thickened tailings discharge. This paper presents a case study for a large copper mine in which underflow from a series of paste thickeners with a nominal tonnage of 3,660 tph at 59% solids concentration would be mixed with 1,363 tph of filter cake at 80% solids concentration. The combined tailings (ultra paste) would be discharged equally into two open channels (flumes) at the combined solids concentration of 63.5%. The ultimate goal of adopting an ultra paste scheme is to produce homogenous consistency tailings, hence proper mixing of the paste and filter cake has to occur. In this study based on a series of tests, the mixing requirement has been assessed. The study also covers a conceptual investigation of natural turbulent mixing (NTM) of the filtered tailings with paste thickened tailings and issues associated with the deposition of the combined tailings, the ultra paste, into the existing TSF. In the conclusion, the study indicates that NTM can possibly occur only for the case in which the total tailings are discharged into one channel, which is not practical due to limitations with regards to tailings management. Hence, mechanical mixing has been recommended in this case.